FAQ

Frequently Asked Questions

How much does paver sealing cost in Jacksonville Beach?

Jacksonville washing companies publish about $1.75 to $3.25 per square foot to clean, sand and seal. On that scale a 1,000 square foot driveway runs roughly $1,750 to $3,250. One company also says beach access and condo logistics can move a quote more than square footage does. For a number on your own place, book a free estimate.

Should pavers be sealed in Florida?

Usually yes, once the color fades or the joints start to empty. Sealer slows fading, helps hold joint sand in place and makes a surface easier to rinse. The cost is a repeat job every few years. To see where your pavers stand, call (904) 541-9975.

How long does paver sealing last in Florida?

Plan on two to five years, a span a Jacksonville sealing company gives for Northeast Florida. A Jacksonville guide puts driveways and pool decks near three years and shaded patios nearer five. When water soaks in instead of beading up, the coat is wearing thin. To have yours checked, call (904) 541-9975.

Will salt air and beach sand cause trouble for sealed pavers?

Both can. A Jacksonville washing company says sand-packed joints are common at the beach and that salt leaves a white haze after windy weather, which it treats with chemistry and a rinse instead of a hard blast. A good job clears out the sand first, since sealing over it is how jobs fail. To talk through your driveway, book a free estimate.

Can a rental property be sealed between guests?

Often, with planning. One Jacksonville company says its beach crews work early in the day and keep turnarounds quick for rentals. The surface still has to be dry and the traffic wait set by the product label, so ask for the whole schedule before you book. To start on yours, call (904) 541-9975.

What happens at the first visit?

The contractor looks at the whole paved area, notes low spots, old sealer and stains, and measures for a written quote. A Jacksonville company says it works from photos and a site look, then protects plants, outlets and windows before any cleaning starts. You hear the price before work is booked. To get the first visit scheduled, book a free estimate.

What do professionals use to seal pavers?

A 2026 Jacksonville guide describes two families of sealer, film-forming for a wet look and penetrating for a natural look. One Jacksonville company lists four finishes: wet look high gloss, wet look satin, natural matte and a penetrating product for natural stone. It also sweeps in kiln dried joint sand first and rolls out standing puddles after the sealer goes on.

Why is paver sealing so expensive?

Most of the price pays for the prep, not the sealer. Washing, stain treatment, refilling joints and waiting for a dry surface take more hours than the coat itself. A 2026 Jacksonville guide warns that bids under $1 per square foot suggest skipped prep or thinned product that may fail within a year.